Gigabyte GA-8IPE775-G INFO LINK HELP

Hello,
Having a slight problem connecting to the Info Link pins on my GA-8IPE775-G Motherboard.
The problem is i have VCC1,VCC2(RED),two +D(GREEN),two -D(WHITE) and two ground(BLACK)connectors comming out of the ATX Chassis and am unsure were they are supposed to go.
Have studied the manual though it does not make this clear,please HELP.
Regards,
Richard
2 answers Last reply
More about gigabyte 8ipe775 info link help
  1. This topic has been moved from the section Opinions and Experiences to section Motherboards & Memory by Grumpy9117
  2. Is it a little tiny black connector, with one of the corner pin holes blocked off? Likely your case's front panel USB connector; shown as item 15 on page 19 of your manual, and pinned out on page 26. If it does have the blocked pin, you can't plug it in wrong - the blocked hole 'keys' the socket for correct insertion...
Ask a new question

Read More

Gigabyte Motherboards