I started overclocking my Q6600 and i've noticed that my motherboard has some serious vdrop and vdroop's.
In my case I had to set in BIOS 1.4075v, which in system showed as 1.384v and in stress drops down to 1.36v.
Now I've looked up on google people do pencil mods on their boards to eliminate this problem but most of images show SE or Deluxe edition. Now here's the question, which resistor I need to shade to eliminate vdrop and vdroop.
Here are couple of my images I took (didn't want to bother with taking the cooling off, if you need more, just ask).