Sign in with
Sign up | Sign in
Your question
Solved

Failing POST after installing new RAM

Tags:
  • Memory
  • RAM
Last response: in Memory
Share
December 3, 2010 6:52:03 PM

I have a intel DP45SG motherboard with 1 stick of corsair's ddr3 1333 2GB installed
(VS2GB1333D G) I bought an identical stick of RAM and got it today, but when I tried installing it
it beeps three times on POST, telling me that I have no memory installed. I took the new stick out and
the computer turns on fine like usual. Don't know what the problem is and need some help.
Any suggestions would be appreciated.

More about : failing post installing ram

Best solution

a b } Memory
December 3, 2010 10:01:03 PM

Have you tried the new stick by itself on the board to rule out a defective stick?

Have you verified which slot on the motherboard the 2nd stick belongs?

Have you checked the DRAM voltage is set proper voltage?
Share
December 3, 2010 11:32:50 PM

Yes, I tried that and I think that it may be defective. I'm sending it back to newegg and getting a replacement to see if that works
m
0
l
December 10, 2010 11:06:14 PM

Best answer selected by beyblade5566.
m
0
l
!