G.skill m4a79xtd evo timings

[jaksart]

I finished building my first computer a few months ago and i had 4gbs ram. I just got 4gb and installed today. I have them set to 1600mhz in bios which they are supposed to be running at. I don't know much about ram timing so this is where i need help. They are supposed to be at 9-9-9-24 and in bios there is a string of numbers that are 11-11-11-29 in memory timing. Should I change the first 11-11-11-29 to 9-9-9-24 and leave everything else on auto? If not, what should i change them to?

Here are photos of the RAM timing menus in BIOS:

Just let me know what you guys think i should change, I'm not trying to overclock them, just run them as advertised.

here is that RAM i bought:

http://www.newegg.com/Product/Product.aspx?Item=N82E16820231277&cm_re=g.skill_1600_4gb_ripjaw-_-20-231-277-_-Product

Thanks

 

[jaquith]

Assuming the RAM is compatible wit your MOBO and they're installed in the correct slots the set the CAS 9-9-9-24-2T, and DRAM Voltage 1.5v.

Q - What MOBO and what slots is the RAM installed in?
Q - Besides the 2 sticks of {F3-12800CL9D-4GBRL} is there any other RAM installed?

 

[jaksart]

I have an asus M4a79xtd evo with 4 sticks (8gb) (4x2gb) using all 4 slots. i just put up some photos of my BIOS.

 

[jaquith]

Q - are they ALL the SAME 2 Kit of F3-12800CL9D-4GBRL? Also, if they're the same you need to install as follows {DO NOT MIX the Kits}:

KIT 1 A1 & B1
KIT 2 A2 & B2

From the picture {top}
11-11-11-29 corresponds to the 9-9-9-24, and it's the BIOS 'safe' guess. So change from Auto to the 9-9-9-24 the 2T is the DRAM Command Rate and the 24 is the TRAS.

 

[jaksart]

I bought 1 kit of 2 (2x2gb) first, then another on black friday, they are the same kits and i didn't mix them, one kit is in A1 and B1 and the other is in A2 and B2.

Thanks for your help, I'm sort of new to RAM timing.

 

[jaksart]

should i change the TRC to 33? I read that the the TRC=TRAS +T Rp

 

[jaquith]

The AI Overclock Tuner 'may' require {Manual} to set the Speed {DDR3-1600}, Timings {9-9-9-24 the 2T}, and DRAM Voltage {1.5v}.

 

[jaksart]

the voltage and speed are both correctly set, i know how to set those, it was just the timings i was iffy about. Thanks for your help though!