Need help to fit motherboard into case

[bloodmage3]

Hi I just bought a ASROCK 880GM-LE micro ATX 9.6" by 7.8" and a rosewill blackbone case that supports micro ATX from newegg.ca BUT when they arrived, the case manual says it only supports 9.6" by 9.6" microatx. I tried putting the mobo in but only a few holes line up. Any suggestions ? or should I return it and pay the restocking fee ):
Thanks in advance

 

[jaquith]

MOBO 9.6x7.8 < CASE 9.6x9.6 - so physically it should fit.

As far as the 'standoffs' they should unscrew and you should have them align ONLY with the MOBO holes. Looking at the interior photo they seem to be the screw-in type -> http://www.newegg.com/Product/ImageGallery.aspx?CurImage=11-147-023-Z30&ISList=11-147-023-Z28,11-147-023-Z29,11-147-023-Z30,11-147-023-Z31,11-147-023-Z32,11-147-023-Z33,11-147-023-Z34,11-147-023-Z35,11-147-023-Z36&S7ImageFlag=1&Item=N82E16811147023&Depa=0&WaterMark=1&Description=Rosewill%20Blackbone%20Black%20Steel%20/%20Plastic%20ATX%20Mid%20Tower%20Computer%20Case

 

[bloodmage3]

Yup, just put the motherboard in, worked like a charm

 

[bloodmage3]

Best answer selected by bloodmage3.

 

[Maziar]

This topic has been closed by Maziar