Sign in with
Sign up | Sign in
Your question
Solved

How to install RAID drivers on already installed Windows 7?

Last response: in Windows 7
Share
October 23, 2011 9:41:17 PM

I have done the same,have an intel series 510 `120 gb ssd and a cariar black 1 TB with windows 7 installed,a z68xp-ud4 motherboard.every time I try to reset bios from ide to raid when it reboots the system crashes and Ihave to do a restore and reset bios back.Any help would be appreciated

Best solution

a b $ Windows 7
October 29, 2011 6:02:50 AM

dablue1 said:
I have done the same,have an intel series 510 `120 gb ssd and a cariar black 1 TB with windows 7 installed,a z68xp-ud4 motherboard.every time I try to reset bios from ide to raid when it reboots the system crashes and Ihave to do a restore and reset bios back.Any help would be appreciated



ou may have already visited this Tom's post, as you start out by saying you have done the same.

http://www.tomshardware.com/forum/252359-32-help-proper...
Share
October 29, 2011 4:00:10 PM

Well. I had to sacrifice my cache to make windows detect my hard drive. Better than a full reformat. For future reference. Windows repair will not detect accelerated hard drives.
m
0
l
Related resources
November 5, 2011 11:41:57 AM

Best answer selected by dablue1.
m
0
l
May 7, 2012 8:03:11 PM

GIGABYTE Z68Xp-UD4 (RAID-0) Installation With SSD Acceleration Issue [100% SOLVED!]

You have to always keep in mind, that HDD-SSD Smart Storage System is ultimately faster and cheaper than getting a bigger SSD and installing the OS directly on the SSD. This is a poor solution to the problem at hand. So follow the bottom instructions carefully for a sweet system setup! Make sure all your equipment including the SSD and the HDDs are (SATA3) compliant. GO TO THE LINK BELOW FOR A COMPETE LIST OF INSTRUCTIONS...
http://www.netsectors.com/blog/?p=308#more-308 :bounce: 
m
0
l
!