Gateway SX2802-01 and Vantec SATA card Tags: SATA Gateway Vantec Components Last response: June 22, 2010 4:27 AM in Components Share jimbeaurama June 13, 2010 1:49:29 AM Hello, I just purchased a Gateway SX2802-01 desktop to use as a HTPC. Since it only has 2 SATA ports, I purchased a Vantec 4+1 SATA PCI-E Combo Host card in order to expand the number of SATA ports. When I plugged the card in and turned the computer on, the computer would get to the Setup dialogue and reboot continuously. I cannot figure out what is causing this "kernel panic." If anyone has any experience with the Vantec SATA cards and can offer some guidance, I would appreciate it. Thanks. Jim More about : gateway sx2802 vantec sata card enzo matrix June 22, 2010 4:27:13 AM Are you attempting to have the boot drive connected to the vantec card? Because if so, I do not believe it would work. Can't find your answer ? Ask ! Publish Related resources: ForumAdding memory to Gateway sx2802-01 ForumGateway SX2802-01 motherboard specifications ForumGateway sx-2802-01 Video card replacement ForumVantec UGT-ST622 Asmedia 106x SATA Controller will not boot ForumGateway sx2802-01 graphics card ForumVantec raid controller conflicts with nvidia video card ForumGateway sx2802-02c ForumIntel Chipset Limitation: No Video During Post w/ PCIe x16 slot use? ForumConnecting 2.5" SATA Disk to Desktop Internal SATA ForumOld Gateway isn't recognizing new sata HDD ForumWill ASUS Radeon HD5450 fit in SX 2802-01? ForumSX2800 bios unlock & upgrade questions ForumHelp Me ForumSata 6 Gb/s PCIe card Upgrade & OS Won't Boot ForumNew Graphics card for Gateway FX6840 series ForumLeast Expensive Full HD 1920x1080 17" Laptop ForumBest Cpu cooler for ~40 Forum[Solved] Compatibility issue of board & video card ForumBest sound card for movies ForumSound Card Advice More resources Read discussions in other Components categories Power supplies Sound cards NICs Akasa Antec Cooler Master Cougar DeepCool Enermax !