Search
Sign in with
Sign up | Sign in

Asus A7PRO no display

Last response: in Components
Share
Motherboard Expert

Problem:
-power system on
-CPU fan spins
-No display
-No beeps

Info:
-Ram tested good
-PSU tested good
-CPU tested good
-video card tested good (tried multiple also, one in PCI slot, one in AGP slot)
-Motherboard power light on
-Monitor tested good
-Motherboard set to bios mode.
-also tried manual configuration 100MHz FSB and 10x multiplier
-also tried manual configuration 133MHz FSB and 10.5x multiplier

Equipment:
-Athlon XP 1600+
-Asus A7PRO rev. 1.04

Thanks in advance for your help guys. I've been at this for a while with no solution. If you have any questions or need more information, please ask.

Here's a link to the motherboard manual: http://www.bcom.de/ftp/treiber/Asus/Hanb%FCcher/a7pro-1...

The motherboard is not in a case and is on a non-conductive surface beside a working Pentium 3 system that is also not in a case.

More about : asus a7pro display

Register or log in to remove

I've had this same problem before. It turned out that the motherboard was shorting on the case. The chassis had "bumps" instead spacers to mount the motherboard. These "bumps" were just wide enough to make contact with the motherboard's circuitry. Try it with the motherboard outside of the case and see if it POSTs. Hope it works.
Motherboard Expert

jcv0085 said:
Also, I should add to set the motherboard on a non-conductive surface.

The motherboard is not in a case and is on a non-conductive surface beside a working Pentium 3 system that is also not in a case. So no shorting. Thanks though :) 
Register or log in to remove
 
Ask the community
Read discussions in other Components categories
!