Solved New PSU, but system overclocked, should I set bios to default? Tags: Homebuilt Default BIOS Systems Last response: April 7, 2010 5:20 PM in Systems Share Xyos April 6, 2010 7:17:45 PM I bought a new PSU in preparation for the new GTX 480. My system is overclocked (Q9550 at 3.7 ghz, voltage adjusted slightly). Should I set the bios to default before switching power supplies, or will it not matter? Thank you in advance More about : psu system overclocked set bios default Best solution jsc a c 122 B Homebuilt system April 6, 2010 7:40:50 PM If the power capacity of the PSU is adequate, there's no need to go back to the stock settings. Xyos April 7, 2010 5:20:42 PM Best answer selected by Xyos. Can't find your answer ? Ask ! Publish Related resources: ForumOverclocked settings not sticking, reverting to default on reboot. ForumBSOD/Freeze on POST with default settings - help me locate the error ForumI5 overclocked by default to 4.1GHz (42x)! Help! ForumP4S533/Award BIOS ; weird default settings ForumHELPP PLZ! Bios settings go to default after reboot ForumNew SSD cannot set as default boot drive ForumHow high should I set multiplier on new Pentium 965EE? ForumGecube x1950xt AGP - PC shuts down when set to default clock ForumNew build... default DRAM Frequency ForumHelp Guys,,, Vcore set from BIOS resets in Windows ForumOverclocked the overclocked ForumLsp ultra 750 watt psu with new gtx590 for non overclocked system ? ForumAMD Phenom ii x2 550 BE 3.4ghz (???) Not overclocked ForumNew system up and running. Need a bit of help with bios ForumShould i overclock through the bios ? ForumNew System : Bios Settings ForumBuilding an $1000 Dollar gaming PC Forum$4000-$4500 budget. 2 PC's better than 1? ForumNew Thermaltake Element G case ForumNew Builder seeking advice on build More resources Read discussions in other Systems categories Homebuilt New Build Prebuilt Cases Power Supplies RAM CyberPower !