Sign in with
Sign up | Sign in
Your question

Case Power cable

Last response: in Motherboards
Share
December 21, 2010 5:44:17 PM

I just hooked up my 6870 and got it running however i might have unpluged the cable that makes my power buttons work on my Case, I had to start it up using the power switch on the mobo rather then the case. Im currently using a M9 Case and x58m. Im confused as to where the power cable for the case goes (the one that the power On and reset buttons uses not the one at the back) thanks for the help!

More about : case power cable

December 21, 2010 6:37:15 PM

Hello,

You probably disconnected the front connector power switch by accident.
Here's a picture with the location of the connectors :

http://al360ex.t35.com/MSI%20X58M.jpg

And here is a picture describing what goes onto each connector :

http://al360ex.t35.com/Front%20connectors.jpg

Hope this helped,
al360ex

P.S. : When you click on the link, it will tell you that the page was not found. Just click on the address bar and press enter, the image will appear. I don't know why it does that.
m
0
l
December 21, 2010 6:52:55 PM

thanks, im going to try it, ill tell you if it works
m
0
l
!