Sign in with
Sign up | Sign in
Your question

Will This PSU Fit in a ATX Full Tower???

Last response: in Components
Share
June 24, 2010 1:00:44 AM

DYNAPOWER USA DP-400TCR8A

http://www.newegg.com/Product/Product.aspx?Item=N82E168...

Case

http://www.newegg.com/Product/Product.aspx?Item=N82E168...


I want a redundant power supply for my computer as I plan on hosting a few of my websites but I want to know if this PSU will fit in a ATX full tower case so I don't buy the wrong one. Thanks for anyone's help.

More about : psu fit atx full tower

June 24, 2010 1:31:23 AM

Upon reviewing the dimensions in the specifications, it appears to be standard width and height. However, it is extremely long, at 7.8". Make sure that this will fit in your case. The top 5.25" bay, even possibly the top 2, may not be usable.
m
0
l
June 24, 2010 1:38:13 AM

Thanks a lot.

Can I ask you one more question.

I have an Asus Dseb-Dg motherboard and there is a problem with the PSU

http://www.newegg.com/Product/Prod [...] sus%20dseb

The PSU I purchased was a 20 pin but I purchased a 20 pin to 24 pin converter and it still does not work. I read a review about problems with Asus motherboards
and they said that it is essential for the 24 pin motherboard to have a 24 pin connector. I am going to buy a new power supply but does the power supply have to be a 24 pin or can it be a 20 + 4 pin. Thanks a lot for anyone's help.
m
0
l
Related resources
a c 139 ) Power supply
June 24, 2010 1:43:51 AM

Is this for an older motherboard with 5V CPU?
That particular PSU isnt a great choice for modern motherboards.
It's an older model with -5V and very low +12V amperage.
m
0
l
June 24, 2010 2:10:48 AM

WR2 said:
Is this for an older motherboard with 5V CPU?
That particular PSU isnt a great choice for modern motherboards.
It's an older model with -5V and very low +12V amperage.


What should I look for in a redundant power supply considering my setup?
m
0
l
!