Sign in with
Sign up | Sign in
Your question

Twin2x4096-6400c5dhx p5q pro settings

Last response: in Motherboards
December 30, 2010 8:47:48 PM

installed this ram a few days ago and getting bsod run memtest86 and it past over 2 tests with out any errors...running it at 1.8v should i incress to 1.9/2.0v ??? or change any settings on bios thanks for your time
a c 111 V Motherboard
December 30, 2010 9:08:34 PM

Welcome, Newcomer! The first step that is recommended is to adjust your BIOS. Set your DRAM voltage, frequency (MHz), and timing (CL/CAS) to what is displayed on the sticker on the side of your RAM modules, or on the packaging the RAM came in.

By the way, posting your complete system information never hurts.
a c 717 V Motherboard
December 30, 2010 9:18:18 PM

Welcome to Tom's Forum! :) 

P5Q Pro Tested -
ref ASUS P5Q Pro -

DDR2-800 5-5-5-18-2T @ 1.8v

DRAM Frequency -> DDR2-800MHz
DRAM Voltage -> 1.8v
DRAM Timing Control {enter}
-> 5-5-5-18
-- optional if it's still unstable increase by ~+0.1V over auto
NB Voltage -> 1.2~1.26v

Use only if above is unstable:
-- optional if it's still unstable.
DRAM Read Training -> Disabled
Mem OC Charger -> Enabled
December 30, 2010 10:09:15 PM

thank you for the quick reply and help

I tried it at 5-5-5-18-2t @1.8v and was crashing in windows/playing games internet ect incressed the voltage to 2.0 and run 3 passes so far of memtest no errors.

maybe the NB needs 1.26v

but if it still crashes will try Dram reading training and mem oc charger settings also
and post results..

thanks for the help..bit of a noob posting on here hehe :)