Sign in with
Sign up | Sign in
Your question

HOW DO I LOAD BIOS IN TO COMPUTER WHEN ITS TELLING ME NO SIGNAL ON MONITOR?

Last response: in Motherboards
Share
January 5, 2011 12:23:22 PM

Hello,
can anyone tell me how i can get my new motherboard (giga0byte GA-K8M800M-RH)to work on my monitor as i cant get into the bios as it says no signal on my onitor? thanx
a b C Monitor
a c 435 V Motherboard
January 5, 2011 12:27:18 PM

You can reset the bios by removing the board battery for a few seconds with the system off. If you still get no signal, then the problem is probably elsewhere. Troubleshooting faqs are available on this and other websites.
January 5, 2011 12:29:09 PM

thank i will try this.
Related resources
January 5, 2011 12:37:54 PM

o1die said:
You can reset the bios by removing the board battery for a few seconds with the system off. If you still get no signal, then the problem is probably elsewhere. Troubleshooting faqs are available on this and other websites.



hi i did the reset but nothing
January 5, 2011 12:51:21 PM

what else can i do i have the monitor in the motherboard output but still no signal?
a b C Monitor
a c 435 V Motherboard
January 5, 2011 1:17:46 PM

Reseat the ram and power supply connections. IF you connect the case internal speaker, you may get some beep codes which will help you isolate the problem. Otherwise, look for some troubleshooting faqs on this website or anandtech.
Related resources
!