Sign in with
Sign up | Sign in
Your question

Trouble recognizing HD

Last response: in Motherboards
Share
January 25, 2011 12:25:20 PM

Below is a question I sent to Gigabyte about my new build, install of win7 64Bit. The mother board is a Gigabyte GM-889GA D2H, and the processor is Athalon II X3 3.2 Ghz RANA 450. I have 2 1 TB Hitachi HDs, and an Asus DVD-RW. 8 GB of DDR3 1333 Ram....2 sticks. The Case, though I suspect irrelevant to the problem, is as Coolermaster 690II Advanced, and a Zalman 500 watt PSU. Also a CM Hyper 212 plus CPU Cooler. decent system. It booted up the first time, but as you can see below, the Boot screens don't seem to match the actual SATA plug designations on the MB, and the second HD does not show up in my computer, though it does show up in the device manager. Weird. I haven't hooked it up to the internet yet.....I plan on ether-netting it to my Time Warner netgear Cable modem/router. That won't be any problem, will it? I'm already connected that way on it with the computer I'm using for this post. Just Plug and go with win7?

I did get my computer built, and installed Win7 professional. The installation went smooth,but there are unexpected problems. I have not gotten it connected to the internet yet, as I want to get it running right first, but there is a serious problem that I need to find out about. I did find out the bios version....it is Award version F6. I have 2 Hitachi 1TB hard drives, "HDS721717CLA332 JP40A3EA is the BIOS read out on their numbers, and an Asus DVD-RW, DRW-24B1ST 1.04 Bios read out numbers on that one. The boot screen shows that the MB is seeing both of the drives, but not on the same channel as the plugs say on the MB. I have one HD plugged into the 0 plug, one into the 1 plug, the DVD in the 3 plug, and a front panel connector in the 4 plug, with nothing plugged into the front panel. On the boot screen, it says that both 0 channel master and slave have nothing on them, One HD is master on Channel 2, and Asus DVD is slave on channel 2, and other HD is Master on Channel 3 with nothing on slave channel 3. However, when windows boots, and I check My Computer, there is only one of the HD in the window, and the DVD RW. The other HD does not show. However, in the device manager, I can see both Hard Drives, and the Properties reports that both are working properly.......Can you help me with this? Also, Easytune6 does not seem to want to install from the drivers disk. I guess that I can download it when I get on line with the new computer, but have you had any reports of trouble with easy tune? The files seem to by installed, but when I click the icon, the program seems to just try to start, but fails.

If you have any idea what is happening, I sure like to hear.

Mike

More about : trouble recognizing

a b V Motherboard
January 25, 2011 4:52:21 PM

I have a simple idea. Not about why the ports don't match what you expect, but why the disk that doesn't have the OS installed doesn't show in Windows.

Did you partition and format it? New drives are all unallocated space, and need to be set up before Windows can see them as a drive.
m
0
l
a c 177 V Motherboard
January 26, 2011 12:32:25 PM

Why Knott!?! Tell me - are you a Heinlein fan, or what?
m
0
l
Related resources
a b V Motherboard
January 26, 2011 1:26:41 PM

bilbat said:
Why Knott!?! Tell me - are you a Heinlein fan, or what?

Of course I am! I picked that name back when I was a lurker; I probably should have used a male character considering the conflict now that I use my name and that obviously male piccy. There's a thread around here somewhere that abuses my s*xuality based on the screen name I picked. Maybe I should have used ValentineMichael instead? Or Lazarus?

HMM - maybe we should go PM for the rest of this conversation.
-Peter

PS - speaking of Stranger in a Strange Land, is this a bouncer: :bounce: 
m
0
l
!