New no matching name USB connectors

Hi!

I have bought a new motherboard and have an older USB racket with connectors that does not
match my new MB's desciption, can someone here tell me which to connect to which:

Mainboard's name:

1 = Power (5V)
2 = Power (5V)
3 = USB DX-
4 = USB DY-
5 = USB DX+
6 = USB DY+
7 = GND
8 = GND
9 = No Pin
10 = NC

Older USB racket connectors:

VCC 1
VCC 2
GND 1
GND 2
DATA +1
DATA -1
DATA -1
DATA -2
Sheild

Which of the above connectors goes where on my new mainboard?

Regards:

ToddeSwe
5 answers Last reply
More about matching connectors
  1. Sorry, it should be:

    DATA +1
    DATA -1
    DATA +2
    DATA -2
  2. Check out the Wiki below under Mainboard USB Connector...

    http://www.allpinouts.org/index.php/USB_-_Universal_Serial_Bus
  3. Hi and THANKS! From what I can see and understand i have made the following:

    1 = Power (5V) = VCC 1
    2 = Power (5V) = VCC 2
    3 = USB DX- = DATA -1
    4 = USB DY- = DATA -1
    5 = USB DX+ = DATA +1
    6 = USB DY+ = DATA +2
    7 = GND = GND 1
    8 = GND = GND 2
    9 = No Pin
    10 = NC

    Is this right?

    Older USB racket connectors:

    But where does the:

    Sheild

    goes?

    On my old motherboard i had ONE big connector, no i have two small ones, so my guess is that on PIN 1 in the first connector i put: VCC 1 and on USB connector 2 PIN 1 i put the VCC 2 and so on ... right?

    ToddeSwe
  4. Problem solved, no need for further help! :\
  5. Glad you got it figured out!
Ask a new question

Read More

Gigabyte USB Motherboards Power