Hi all,
I just added a Vapor X 5770 to crossfire with my Asus Cucore 5770. I didn't really run into any problems initially, I uninstalled drivers, then installed the second card/bridge, and installed drivers again. Catalyst CC, recognized CF setup and its enabled. I was able to play Just Cause 2 for about an hour with noticeable boost in performance, without issues.
However whenever I open up everest and click on GPU I get a BSOD that says
"A clock interrupt was not received on a secondary processor within the allocated time interval"
My temps seem OK, I had GPU-Z on while I played, and the cards never went over 70 C, so I'm not sure why everytime everest reads info from the card it freezes up.
I'm currently on a 600W ModXStream Pro, could it be related to the PSU? Or some other issue..
Thanks
I just added a Vapor X 5770 to crossfire with my Asus Cucore 5770. I didn't really run into any problems initially, I uninstalled drivers, then installed the second card/bridge, and installed drivers again. Catalyst CC, recognized CF setup and its enabled. I was able to play Just Cause 2 for about an hour with noticeable boost in performance, without issues.
However whenever I open up everest and click on GPU I get a BSOD that says
"A clock interrupt was not received on a secondary processor within the allocated time interval"
My temps seem OK, I had GPU-Z on while I played, and the cards never went over 70 C, so I'm not sure why everytime everest reads info from the card it freezes up.
I'm currently on a 600W ModXStream Pro, could it be related to the PSU? Or some other issue..
Thanks
Facebook
Twitter
Instagram