Solved

Will this Corsair fit in my case ...

K so i'm planning to buy this ... :

http://www.memoryexpress.com/Products/PID-MX22031%28ME%29.aspx

and my case is :

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01492775&tmp_track_link=ot_faqs/top_issues/en_uk/c01492775/loc:1&lc=en&dlc=en&cc=uk&product=3752885&lang=en


It's really not a big case, the Corsair PSU is about the same dimension as the one i have right now, but i'm not sure if the case will have room for the lengthy cables.

The Case on the outside is 35cm (L) X 17cm (W) X 38cm (Depth),

So what do u guyz think ????

I really don't wanna change case, as i don't have a lot of $$$ right now ...
10 answers Last reply Best Answer
More about will corsair case
  1. you should be fine, get some zip ties to handle cable management. i think corsair includes zip ties with most of their PSU anyway.
  2. It will fit. You may have to tuck-in and re-arrange the cables if they are longer than necessary. Do not cut off any surplus cables. Neatly arranged cables will help air flow.
  3. TY, thats a relief ...

    Another question, maybe dumb but ...

    The website says: Standard ATX PS/2 size: 5.9"(W) x 3.4"(H) X 5.5"(L); 150mm(W) x 86mm(H) x 140mm(L)

    the 150mm is how deep it goes into the case right (towards the optical drives), the 86mm is from side to side and the 140 mm is up and down ... right ?
  4. 140mm is the length (from front to back). 150mm is the width (from one side of your case to the other) and 86mm is its height (how tall it is).

  5. The 5.5" L (140 mm) is how far it will go towards the optical drives.
  6. Ok, thanks for the clarification

    I finally decided to go with this PSU:

    http://www.memoryexpress.com/Products/PID-MX28731%28ME%29.aspx?curtab=0

    what do u guyz think about it ... ?
  7. Also i will have every connector for my motherboard too right ...

    My Motherboard : http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&dlc=en&cc=us&docname=c01357135

    Sorry for so many questions, i'm a noob when it comes to PSUs
  8. Best answer
    Yes, good decision, and yes you will have all the cables and the connectors necessary. Please keep in mind that the connectors notched/tabs must be aligned before plugging in. Take a look at it, its easy to see.

    And don't worry about the questions. Make sure you have a good comfort level before you assemble anything. Usually, all the information is clearly outlined in the manuals that accompany the products.
  9. Best answer selected by slick3.
  10. Thank you all for your help ...
Ask a new question

Read More

Power Supplies Cases Corsair Components