K7S5A No Beep?

[xeed]

Hey,

i just bought a K7S5a mobo because i thought, after various tests, the old mainboard got damaged. i cant get the "new" one to work. my setup is basic cpu+cooler, one working ram and a working graphic adapter.

i just got 2 speaker pins (+ and -) from my case , not the usual speaker connector with 4 pins.

could u first please help me connecting the pc speaker right to the mainboard with only + and -, so i can hear POST errors?

thanks

xeed

 

[jaquith]

Welcome to Tom's Forums!

Assuming the ECS K7S5A (V3.1B) http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?DetailID=279&CategoryID=1&MenuID=50&LanID=9

Pin
Signal Name
1 SPKR
2 NC
3 Ground
4 +5V

Pins 1 & 4 {SPKR & +5V} are required. You can also try the headset jack in the I/O in the rear of the MOBO.