How can I use the cables included in my 5850 box to connect it to my p

[ws0007351]

I recently purchased a Sapphire Vapor-X Radeon HD 5850, inside the bix, two 6 pin to a 4 pin horizontal plug were included. My power supply is an OCZ Modxtream Pro 700w.
I used to have a 4890 with a 6 8 pin, and my power supply had one 6 pin, and one 8 pin cable, so that worked fine, but Now I have two 6 pin connectors, so I cant connect it. How do I use the two wires included in the package.

This is a picture of the contents:http://www.newegg.ca/Product/ImageGallery.aspx?CurImage=14-102-886-Z06&SpinSet=14-102-886-RS&ISList=14-102-886-Z01,14-102-886-Z02,14-102-886-Z03,14-102-886-Z04,14-102-886-Z05,14-102-886-Z06&S7ImageFlag=1&Item=N82E16814102886&Depa=0&WaterMark=1&Description=SAPPHIRE Vapor-X 100282VXSR Radeon HD 5850 (Cypress Pro) 1GB 256-bit GDDR5 PCI Express 2.1 x16 HDCP Ready CrossFireX Support Video Card /ATI Eyefinity

Edit: yes those are molex to 6 pin, but where do I connect the molex part? This is my psu: http://www.newegg.ca/Product/ImageGallery.aspx?CurImage=17-341-018-S01&SCList=17-341-018-S01%2c17-341-018-S02%2c17-341-018-S03%2c17-341-018-S04%2c17-341-018-S05%2c17-341-018-S06%2c17-341-018-S07%2c17-341-018-S08%2c17-341-018-S09%2c17-341-018-S10&S7ImageFlag=2&Item=N82E16817341018&Depa=0&WaterMark=1&Description=OCZ%20ModXStream%20Pro%20OCZ700MXSP%20700W%20ATX12V%20V2.2%20%2f%20EPS12V%20SLI%20Certified%20CrossFire%20Ready%2080%20PLUS%20Certified%20Modular%20Active%20PFC%20Power%20Supply%20compatible%20with%20core%20i7

i7 920 @4ghz
Vapor-X 5850
Antec 900
Asus P6T SE
Ocz Gold 6gb ddr3 @ 8.8.8.24 1.64v 1600mhz
Ocz modxtream pro 700w
Wd caviar black 640gb
Liteon 24x drive

 

[alextheawesome]

Those are molex to 6 pin. Although I'm a bit skeptical on just 1 molex>6pin. I think it would be better to use one of these http://www.gttkc.com/shop/images/molex_pci-e.jpg


EDIT: I just checked your power supply, and it has 1x 6 pin and 1x6+2 pin. So the "8pin" should just be like a little clip thingy. like this http://lian-li.com/v2/tw/product/upload/image/pss/psu%20pcie%206%202pin.jpg

 

[WR2]

You can use the PCI-e x6 pin connector and one of those 4pin molex to 6pin PCI-e power connectors.
The 8pin PCI-e power connector won't be used.

 

[WR2]

Also, you might be able to use the 8pin PCI-e connector.
Some cards let you insert the 8 pin connector into the 6 pin receiver with the extra two leads hanging outside the plug.