GA-880GM-UD2H BSOD So Frustrating

[marko1045]

So long story short my computer is BSOD'ing. This is a new budget build for my brother. At first it was 20 minutes after boot up. I then switched up the timings to 7-7-7-21(as that was the advertised timings) and then it stopped happening. After about 2 days of normal usage it all of a sudden did it again. My thinking is it has to be a setting with the ram within the bios. I do not know what else to tweak. I took some pics of my current bios setting to give you guys a better idea of my settings. Would changing my hdd to operate in AHCI cause any of this to happen?

Specs are:
AMD x6 1055t w/ Stock fan, No OC
GA-880GM-UD2H mobo rev 1.4, F8 bios(latest version)
2x2gb Kingston HyperX KHX1333C7D3K2/4GX
HIS Radeon 5770 1gb
750gb Western Digital Black
Antec EA-500D Green 500W


PC health Status

Tweaks I can make

 

[davcon]

Up the ram voltage to 1.65v which is spec for that ram kit.
Using 1.64 might also work.
http://www.kingston.com/hyperx/products/khx_ddr3.asp
If you still have issues you might have a bad module.
Run a test one module at a time to determine if you do.
http://www.memtest.org/

 

[marko1045]

Well that only makes sense. Thanks alot Dav and I appreciate you helping me out with past questions as well.