Am I reading this the right way?

[PF85]

So I was looking at CPU-z to see if everything was right with my hardware.

I then clicked the graphics tab and found this:

It runs on a Gigabyte P55-UD4 board.

Am I reading this wrong? Shouldnt those two numbers be much higher?

 

[JDFan]

That is when it is running in 2d mode -- the 5xxx series cards downclock themselves to conserve power and lower heat when the card is not in heavy use - when you stress the card the clock speeds will increase but CPU-z shows the current state of the card which is the clock speeds it is showing right now while the system is not using the card heavily.

 

[PF85]

That is when it is running in 2d mode -- the 5xxx series cards downclock themselves to conserve power and lower heat when the card is not in heavy use - when you stress the card the clock speeds will increase but CPU-z shows the current state of the card which is the clock speeds it is showing right now while the system is not using the card heavily.

Ah that makes sense. Thanks alot, I didnt know that about the 5xxx series