Sign in with
Sign up | Sign in
Your question

Please Help...BSOD error

Last response: in Graphics & Displays
Share
May 2, 2010 4:10:47 AM

I will list BSOD error at end of post:

Ok, so every time I render using 3ds max for an animation...about 12 hours into it...my computer will crash giving me a BSOD. I start it back up and then sometimes after an hour after the first BSOD it will do it again....then it mihgt be a day before the next BSOD....Any ideas of what is causing this?? It also happened once when I was spinning the model around quickly in the viewport... My system is overclocked, but temps are good at only 61 degrees under full load....my graphics card is not overclocked at all....I have uninstalled graphics drivers and re-installed them. From what I read a lot of this is due to windows 7 and faulty nvidia drivers...is this true? or some people say it could be ram....when I overclocked the system about 4 months ago I ran prime 95 for 16 hours and also ran intel burn test for 16 passes....it passes flawlessly. I was also surfing the internet, playing music and everything at the same time....Anyways...any thoughts or suggestions would be helpful. I also apologize if this post is in the wrong section but I wasnt really sure where to post this question.... heres my BSOD error and computer specs:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: 124
BCP1: 0000000000000000
BCP2: FFFFFA80073AD028
BCP3: 00000000BE000000
BCP4: 0000000000800400
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\042810-28484-01.dmp
C:\Users\Jake\AppData\Local\Temp\WER-148734-0.sysdata.xml

Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0...

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Evga x58 classi
Corsair hx 1000 watt psu
corsair 3 x 2gb dominator 1600 ram-(voltages and timings at auto runs at 11,11,11,28 1.5 volts)
Evga nvidia gtx 295
intel i7 950 over clocked to 3.8 (190 x 20 vcore 1.24675v)
venomous x heat sink
haf 932 case
2 x 1tb Western Digital caviar black hard drives
windows 7 64 bit

More about : bsod error

!