Sign in with
Sign up | Sign in
Your question

Building a DAW/Video Editing Rig

Last response: in Systems
Share
June 11, 2010 6:21:24 AM

Hi everyone - I'm about to build a new digital audio workstation/occasional video editing system and wanted to ask if anyone sees any conflicts or just has general advice in the event I'm overlooking something or am way off in some of my choices (quite possible). Because digital audio can be demanding, AND because the last time I got a new computer was 6 years ago, I figured I'd go for top of the line components. Here are the parts I'm considering (Newegg). Thanks for all your comments in advance.

Antec P183 Black Computer Case
Item #:N82E16811129061

LG Black Blu-ray Disc Combo SATA Model UH10LS20 LightScribe Support
Item #:N82E16827136183

TRENDnet TEW-623PI 32-Bit PCI Rev. 2.1/2.2/2.3 Wireless N-Draft Adapter
Item #:N82E16833156054

Western Digital VelociRaptor 600GB 3.5" SATA 6.0Gb/s Internal Hard Drive -Bare Drive (Primary)
Item #:N82E16822136555

Koutech IO-FPM220 3.5" Floppy Drive & Multi Card Reader Front Panel
Item #:N82E16813998514

COOLER MASTER Silent Pro RSA00-AMBAJ3-US 1000W Power Supply
Item #: N82E16817171049

ASUS P6X58D Premium ATX Intel Motherboard
Item #: N82E16813131614

G.SKILL Ripjaws Series 12GB (3 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory
Item #: N82E16820231358

Intel Core i7-980X Extreme Edition 3.33GHz LGA 1366 130W Six-Core Desktop Processor
Item #: N82E16819115223

SAMSUNG Spinpoint F3 1TB 3.5" SATA 3.0Gb/s Internal Hard Drive -Bare Drive
Item #:N82E16822152185

And probably a GeForce GTX 480 Video Card
June 11, 2010 5:32:25 PM

Thanks for the advice, I will definitely look into the SSD. My only concern is that 160GB might not be enough..
June 12, 2010 8:43:36 AM

When you use an SSD, load the OS and core apps on it, then put everything else on mechanical hdds, should fit just fine
!