My Asus M2N-68 states it can use DDR2 1066 MHZ ram
So i bought DDR2 1066 Mhz and put it in,
It by default clocked it at 800MHZ,
so firstly i clocked the cam voltage at 2.1 as i heard somewhere.
that didnt work
then i turned the mhz frequency from auto to the max 533Mhz (1066) and left voltage at 2.1
boot failed, cleared bios memory
tried again setting latencies manualy 5 5 5 18,
failed, then tried 5 5 5 16
failed, then tried 5 5 5 25
failed, then tried 5 5 5 15
failed then i tried all above settings with memory from 533 back to auto.
then...
would boot and show 1066MHZ but over clock failed (only stock AI OC of %10)
then i tried upping the cpu voltage from 1.35 to 1.41 volts.
same problem..no change
then tried with stock cpu settings and it works... (x3 core @ 2.8GHZ)
can only run stock cpu specs without overclock to achieve 1066 MHZ,
BTW i have a 700 watt psu so theirs no issue of powering
also the memory is Xram silicon power DDR2 1066.
Im wanting to use my usal overclock but spec my ram at 1066. (3.3 GHZ)
Please help. Thanks guys
So i bought DDR2 1066 Mhz and put it in,
It by default clocked it at 800MHZ,
so firstly i clocked the cam voltage at 2.1 as i heard somewhere.
that didnt work
then i turned the mhz frequency from auto to the max 533Mhz (1066) and left voltage at 2.1
boot failed, cleared bios memory
tried again setting latencies manualy 5 5 5 18,
failed, then tried 5 5 5 16
failed, then tried 5 5 5 25
failed, then tried 5 5 5 15
failed then i tried all above settings with memory from 533 back to auto.
then...
would boot and show 1066MHZ but over clock failed (only stock AI OC of %10)
then i tried upping the cpu voltage from 1.35 to 1.41 volts.
same problem..no change
then tried with stock cpu settings and it works... (x3 core @ 2.8GHZ)
can only run stock cpu specs without overclock to achieve 1066 MHZ,
BTW i have a 700 watt psu so theirs no issue of powering
also the memory is Xram silicon power DDR2 1066.
Im wanting to use my usal overclock but spec my ram at 1066. (3.3 GHZ)
Please help. Thanks guys