Hello all! This is my first post and i hope i'll get the needed help here.
My specs first:
CPU-Z
Binaries
CPU-Z version 1.54
Processors
Number of processors 1
Number of threads 2
APICs
Processor 0
-- Core 0
-- Thread 0 0
-- Core 1
-- Thread 0 1
Processors Information
Processor 1 ID = 0
Number of cores 2 (max 2)
Number of threads 2 (max 2)
Name Intel Core 2 Duo E8200
Codename Wolfdale
Specification Intel(R) Core(TM)2 Duo CPU E8200 @ 2.66GHz
Package (platform ID) Socket 775 LGA (0x0)
CPUID 6.7.6
Extended CPUID 6.17
Core Stepping C0
Technology 45 nm
Core Speed 2719.9 MHz
Multiplier x FSB 8.0 x 340.0 MHz
Rated Bus speed 1360.0 MHz
Stock frequency 2666 MHz
Instructions sets MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, EM64T, VT-x
L1 Data cache 2 x 32 KBytes, 8-way set associative, 64-byte line size
L1 Instruction cache 2 x 32 KBytes, 8-way set associative, 64-byte line size
L2 cache 6144 KBytes, 24-way set associative, 64-byte line size
FID/VID Control yes
FID range 6.0x - 8.0x
Max VID 1.225 V
TDP Limit 65 Watts
Chipset
Northbridge Intel P35/G33/G31 rev. A2
Southbridge Intel 82801IR (ICH9R) rev. 02
Graphic Interface PCI-Express
PCI-E Link Width x16
PCI-E Max Link Width x16
Memory Type DDR2
Memory Size 4096 MBytes
Channels Dual, (Symmetric)
Memory Frequency 340.0 MHz (1:1)
CAS# latency (CL) 5.0
RAS# to CAS# delay (tRCD) 5
RAS# Precharge (tRP) 5
Cycle Time (tRAS) 15
Row Refresh Cycle Time (tRFC) 38
Command Rate (CR) 2T
A MORE IN DEPTH LIST
http://valid.canardpc.com/show_oc.php?id=1173293
GRAPHICS CARD:
http://www.shrani.si/?3P/hv/ClfjyEE/ati.gif
My problem is next:
Nonstop i receive a message from the ATI control panel (specifically from VPU recover) that my graphics accelerator has stopped responding.
What i have tried:
Removing my RAM's and (have 3) using only 1 at a time - DIDN'T WORK
Reinstalling Windows (XP) - DIDN'T WORK - tried it 2x
My PSU is strong enough - NOT THE PROBLEM - at least i don't think so
Took it to a computer repair shop (he said he fixed it) - DIDN'T WORK - same problem
Updated all possible drivers - tried driver only, tried with the control panel, tried Omega drivers, updated all Windows needed drivers (used software made for that specific purpose)
Tried powering the graphics card with 2 different cables that are needed to power it - DIDN'T WORK
The BIOS in the graphics card is probably ok (not an expert) - Sapphire started selling my graphics card with a faulty BIOS - checked it (a i said probably not an expert - probably not a problem as my BIOS and the wrong ones don't match).
SO PLEASE HELP ME!
If you need any more information please say.
P.S.: Could it be because it's GDDR5?
The only thing i didn't try, because i couldn't find the driver is for the PCI-to-PCI bridge driver (it's supposed to be included in the intel chipset drivers package, installed it - still Driver Checker said it's not installed.)
Thank you for any help given.
My specs first:
CPU-Z
Binaries
CPU-Z version 1.54
Processors
Number of processors 1
Number of threads 2
APICs
Processor 0
-- Core 0
-- Thread 0 0
-- Core 1
-- Thread 0 1
Processors Information
Processor 1 ID = 0
Number of cores 2 (max 2)
Number of threads 2 (max 2)
Name Intel Core 2 Duo E8200
Codename Wolfdale
Specification Intel(R) Core(TM)2 Duo CPU E8200 @ 2.66GHz
Package (platform ID) Socket 775 LGA (0x0)
CPUID 6.7.6
Extended CPUID 6.17
Core Stepping C0
Technology 45 nm
Core Speed 2719.9 MHz
Multiplier x FSB 8.0 x 340.0 MHz
Rated Bus speed 1360.0 MHz
Stock frequency 2666 MHz
Instructions sets MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, EM64T, VT-x
L1 Data cache 2 x 32 KBytes, 8-way set associative, 64-byte line size
L1 Instruction cache 2 x 32 KBytes, 8-way set associative, 64-byte line size
L2 cache 6144 KBytes, 24-way set associative, 64-byte line size
FID/VID Control yes
FID range 6.0x - 8.0x
Max VID 1.225 V
TDP Limit 65 Watts
Chipset
Northbridge Intel P35/G33/G31 rev. A2
Southbridge Intel 82801IR (ICH9R) rev. 02
Graphic Interface PCI-Express
PCI-E Link Width x16
PCI-E Max Link Width x16
Memory Type DDR2
Memory Size 4096 MBytes
Channels Dual, (Symmetric)
Memory Frequency 340.0 MHz (1:1)
CAS# latency (CL) 5.0
RAS# to CAS# delay (tRCD) 5
RAS# Precharge (tRP) 5
Cycle Time (tRAS) 15
Row Refresh Cycle Time (tRFC) 38
Command Rate (CR) 2T
A MORE IN DEPTH LIST
http://valid.canardpc.com/show_oc.php?id=1173293
GRAPHICS CARD:
http://www.shrani.si/?3P/hv/ClfjyEE/ati.gif
My problem is next:
Nonstop i receive a message from the ATI control panel (specifically from VPU recover) that my graphics accelerator has stopped responding.
What i have tried:
Removing my RAM's and (have 3) using only 1 at a time - DIDN'T WORK
Reinstalling Windows (XP) - DIDN'T WORK - tried it 2x
My PSU is strong enough - NOT THE PROBLEM - at least i don't think so
Took it to a computer repair shop (he said he fixed it) - DIDN'T WORK - same problem
Updated all possible drivers - tried driver only, tried with the control panel, tried Omega drivers, updated all Windows needed drivers (used software made for that specific purpose)
Tried powering the graphics card with 2 different cables that are needed to power it - DIDN'T WORK
The BIOS in the graphics card is probably ok (not an expert) - Sapphire started selling my graphics card with a faulty BIOS - checked it (a i said probably not an expert - probably not a problem as my BIOS and the wrong ones don't match).
SO PLEASE HELP ME!
If you need any more information please say.
P.S.: Could it be because it's GDDR5?
The only thing i didn't try, because i couldn't find the driver is for the PCI-to-PCI bridge driver (it's supposed to be included in the intel chipset drivers package, installed it - still Driver Checker said it's not installed.)
Thank you for any help given.
Facebook
Twitter
Instagram