Have Crucial m4 SSD connected to Marvell 9128 SATA3 controller on Gigabyte P55A-UD4P rev2.
Originally had Marvell configured for SATA2, I believe because I had the USB 3.0 enabled (which can't work at the same time?)
Turned off USB 3.0, and Marvell confirmed "5.0Gb" in BIOS.
Updated Windows 7 x64 driver to v1.2.0.1027, and name is "Marvell 91xx SATA 6G Controller."
So here's the problem:
I'm getting a max of 120MB/sec from ATTO Disk Benchmark!
I was getting the same max when the controller was set to 2.5Gbps.
So is it stuck in SATA1 mode somehow?
Thanks in advance!
Stephen
Originally had Marvell configured for SATA2, I believe because I had the USB 3.0 enabled (which can't work at the same time?)
Turned off USB 3.0, and Marvell confirmed "5.0Gb" in BIOS.
Updated Windows 7 x64 driver to v1.2.0.1027, and name is "Marvell 91xx SATA 6G Controller."
So here's the problem:
I'm getting a max of 120MB/sec from ATTO Disk Benchmark!
I was getting the same max when the controller was set to 2.5Gbps.
So is it stuck in SATA1 mode somehow?
Thanks in advance!
Stephen