My new ssd is slow, isn't it?

I bought my new system 5 days ago but my ssd takes bad scores at ATTO and AS SSD Benchmark tests. Results are here:

http://i45.tinypic.com/k1p113.png

After i had istalled sata driver, it increased a bit.

http://i48.tinypic.com/3499ytw.png

But write-read speeds are low.

ATTO Disk Benchmark Result:

http://i49.tinypic.com/2s62df6.png

What should i do?

SSD link http://inventus.com.tr/mi_products/Product.aspx?PID=4245
8 answers Last reply
More about slow
  1. AS-SSD uses highly incompressible data to test Read/Write speeds.
    ATTO uses highly compressible data to test Read/Write speeds.

    The advertised 555MB/s Read and 515MB/s Write speeds are with ATTO software.

    Your ATTO benchmark results indicate you are getting 72% of advertised Reads and 75% of advertised Writes.

    In your AS-SSD benchmark "asahci64 - OK" means that your SSD is connected to a ASMedia 6Gb/s port.
    Do you have any Intel 6Gb/s ports on your motherboard? If so, connect the SSD to one of them (in AHCI mode) and benchmark again with ATTO. You should get better results.
  2. Dereck47 said:
    AS-SSD uses highly incompressible data to test Read/Write speeds.
    ATTO uses highly compressible data to test Read/Write speeds.

    The advertised 555MB/s Read and 515MB/s Write speeds are with ATTO software.

    Your ATTO benchmark results indicate you are getting 72% of advertised Reads and 75% of advertised Writes.

    In your AS-SSD benchmark "asahci64 - OK" means that your SSD is connected to a ASMedia 6Gb/s port.
    Do you have any Intel 6Gb/s ports on your motherboard? If so, connect the SSD to one of them (in AHCI mode) and benchmark again with ATTO. You should get better results.

    thanks for answer. i dont know very well i have intel 6gb/s ports or not. i am using asrock z77 extreme 4. have i got?
  3. Yes, that motherboard has Intel 6Gb/s ports.
    Your SSD is currently connected to port SATA3_A0 or SATA3_A1.
    Connect your SSD to port SATA3_0 or SATA3_1. See page 13 of your motherboard manual for the location of the ports.
  4. Dereck47 said:
    Yes, that motherboard has Intel 6Gb/s ports.
    Your SSD is currently connected to port SATA3_A0 or SATA3_A1.
    Connect your SSD to port SATA3_0 or SATA3_1. See page 13 of your motherboard manual for the location of the ports.

    i entered the bios and saw that my ssd is connected to SATA_A1.

    i will try to connect SATA3_0 or SATA3_1 but will i have a problem? any format or setting is required?
  5. Set your SATA mode to AHCI (page 51, section 2.22.2, Step 1).
  6. yeah +1
  7. Dereck47 said:
    Set your SATA mode to AHCI (page 51, section 2.22.2, Step 1).


    i connected my sata cable to SATA3_1. Before this, i had checked sata mode , it was AHCI. I made a test again

    ATTO test

    http://i46.tinypic.com/10p2bno.png

    AS SSD test

    http://i49.tinypic.com/2mcf3sx.png


    There is big difference. Thank you :)

    Last question : Is there any risk using my ssd at this sata port?
  8. imperial93 said:
    Last question : Is there any risk using my ssd at this sata port?


    No. You're good to go. Enjoy!
Ask a new question

Read More

SSD Benchmark SATA Storage