Ok so I'll give you my specs and explain my problem
Intel i7 3770k
16 gb hyperx ram 1866 mhz
OCZ agility 4 256mb sata III
Asus Geforce gtx 680
crap old dvd drive
Ok so I noticed my ssd was not really impressing me that much so I ran atto and sure enough it lacks in read speeds on files bigger than 128k. When I compare them to the benchmark I found online with almost the exact same specs. Its avg is about 250mb/s on files larger than 128k which is significantly lower than it should be. I have the mobo in ahci mode and I have a sata 3 cable and its in a sata 3 port theres 2 versions of the port there. Theres an intel and an asmedia I'm using the intel one. So if anyone has experienced this problem or has an idea what could be causing it let me know. Heres the link to the benchmark I was going by http://thessdreview.com/our-reviews/ocz-agility-4-256gb...
Tried that still no luck. I read your not suppose to fully format the drive just quick format. when I installed windows I clicked new to create the partition then I clicked Format to format it, is that considered a Full format.
Yea that didnt do anything it worked better for 3 of the larger files and went back to 250mb/s. Its all over the place , it also only gets 7.5 for WEI should be a 7.9 pretty sure. I don't know if it could be a bad drive because it gets 400mb/s but its not consistent. This is starting to give me a head ache.