Sign in with
Sign up | Sign in
Your question

Upgrading to 16GB RAM on P8P67 PRO

Last response: in Memory
Share
March 14, 2011 10:46:29 PM

Hello, I'm running the p8p67 pro with I7 2600K, started out with 8GB of ram but having trouble upgrading to 16. The board won't boot and the MemOK LED stays lit. After pressing the MemOK button it cycles through but still no boot. I'm using Corsair Vengeance 2x4GB 1.5v memory.
March 14, 2011 11:55:15 PM

Take old ram out, swap with new ram if it dont boot, new ram is dead. Run memtest86 on new ram. Maybe put voltage to 1.6
March 26, 2011 12:52:37 PM

daship said:
Take old ram out, swap with new ram if it dont boot, new ram is dead. Run memtest86 on new ram. Maybe put voltage to 1.6

daship, thank you. The problem was one bad DIMM I still downloaded the Memtest for future use.
Thanks again - cvzeke54
!