Sign in with
Sign up | Sign in
Your question

P8P67 Pro - Double Asus Splash Screen

Last response: in Motherboards
Share
March 28, 2011 6:37:08 PM

On boot up my asus p8p67 board does this:

Asus splash screen;
Marvell boot hard drive screen;
Asus splash screen;
Marvell boot hard drive screen;
Windows 7

I want to stop the Marvell screen from coming up all together and just have the asus pop up once? Anyone figure this out?

More about : p8p67 pro double asus splash screen

a c 207 Ĉ ASUS
a c 717 V Motherboard
March 28, 2011 7:00:58 PM

The reasons can be many particularly if you're OC'ing using something like an ASUS AI Suite Utility.

noted this post -> http://forums.overclockers.co.uk/showthread.php?p=18696... but the 'APM' won't be my first choice fix.

If it were me:
Uninstall any BIOS invasive utility e.g. ASUS AI Suite
Clear CMOS ; jumper method see pg 2-21 or 39 of PDF.

Failure Update BIOS:
Use BIOS version 1502 http://usa.asus.com/product.aspx?P_ID=HMMvTCuBcZLfu2YL&...
Use a FAT32 USB and extract BIOS to Flash Drive
Restart into BIOS
BIOS Load Defaults
{use ASUS EZ Flash 2} method http://vip.asus.com/forum/view.aspx?id=2007021522310966...
{video ASUS EZ Flash 2} http://www.youtube.com/watch?v=NQKQj_aASCQ
m
0
l
Anonymous
a b V Motherboard
April 15, 2011 5:24:17 PM

pmhabo said:
On boot up my asus p8p67 board does this:

Asus splash screen;
Marvell boot hard drive screen;
Asus splash screen;
Marvell boot hard drive screen;
Windows 7

I want to stop the Marvell screen from coming up all together and just have the asus pop up once? Anyone figure this out?

I resolved this problem by disabling the Marvell storage controller in the BIOS (Advanced/Onboard Devices Configuration). The Marvell controller seems to 'anounce' there is no connected disk at boot. I am using the Intel controller so disabling the Marvell controller was not a problem.
m
0
l
April 16, 2011 4:55:07 PM

Quote:
I resolved this problem by disabling the Marvell storage controller in the BIOS (Advanced/Onboard Devices Configuration). The Marvell controller seems to 'anounce' there is no connected disk at boot. I am using the Intel controller so disabling the Marvell controller was not a problem.



I just changed my settings as suggested above, and I can confirm it worked to resolve the "double splash screen issue" for my P8P67 board too. I am also using the intel controller. Thanks!
m
0
l
!