Asus P6T Deluxe rev2;marvell storage controller bios hangs during post

[robson1023]

Hello,
I've got a boot problem with my Core i7 920/Asus P6T Deluxe/12GB ddr3 / 2x1TB Seagate. After PSU failure and replacement to a new 850 W Corsair AX850 system boots till marvell storage bios initializasion and hangs (for hours). I do not have a possibility to enter BIOS and disconect Marvell controller (or I do not know how).

THanks for any help and regards Rob

 

[jaquith]

Welcome to Tom's Forums!

Try Clear CMOS. A bad PSU can easily toast a MOBO, GPU, CPU, etc. Lets hope this works.

"To erase the RTC RAM
1. Turn OFF the computer and unplug the power cord.
2. Move the jumper cap from pins 1-2 (default) to pins 2-3. Keep the cap on pins 2-3 for about 5–10 seconds, then move the cap back to pins 1-2.
3. Plug the power cord and turn ON the computer.
4. Hold down the <Del> key during the boot process and enter BIOS setup to re-enter data."

 

[JasonAkkerman]

Are there any drives connected to the marvell controller ports? If so try connecting them to the Intel ports.