G
Guest
Guest
Hello, My manual does not give the right detail that I need. MB manual shows HD audio and AC97 audio connections however the front panel doesn't list the singular connection wires in the same format e.g. it lists:
MIC-R
MIC-L
FRONT-R
FRONT-L
REAR-R
REAR-L
GND
BASS
CENTER
The Mic and Gnd connections are no problem but where should I plug in the others?
The remaining available pin assignments after Mic's and GND are plugged in would be:
-ACZ_DET
LINE2_R (is this input or an out put?)
FSENSE1
FAUDIO_JD
No pin
LINE2_L (is this input or an out put?)
FSENSE2
And finally my front panel has 3 input jack points:
Front OUT
Rear OUT
Cen/Bass
Which would I plug the headphones into?
I would like the option of plugging a Line level in the front panel, if I relabelled say Cen/Bass and used those wires to the Line pins will it be okay?
Any help would be much appreciated.
Guy
MIC-R
MIC-L
FRONT-R
FRONT-L
REAR-R
REAR-L
GND
BASS
CENTER
The Mic and Gnd connections are no problem but where should I plug in the others?
The remaining available pin assignments after Mic's and GND are plugged in would be:
-ACZ_DET
LINE2_R (is this input or an out put?)
FSENSE1
FAUDIO_JD
No pin
LINE2_L (is this input or an out put?)
FSENSE2
And finally my front panel has 3 input jack points:
Front OUT
Rear OUT
Cen/Bass
Which would I plug the headphones into?
I would like the option of plugging a Line level in the front panel, if I relabelled say Cen/Bass and used those wires to the Line pins will it be okay?
Any help would be much appreciated.
Guy