Closed Solved

Ssd bechmark

cant workout how to upload the pic but heres the rsults of my vertex 4 benchmark on sata 2 mobo. can you tell me if these results are normal, thanks.
seq
Read:260.49
Write:232.49

4k
Read:23.72
Write:54.98

4k64thrd
Read:151.15
Write:125.97

acc.time
Read:0.148
Write:0.057

overall
read:201
write:204

score 515
7 answers Last reply Best Answer
More about bechmark
  1. idk about that but ik when i got my ssd it was slow a bit because you should do this

    - run regedit.
    - go to HKEY_LOCAL_MACHINE/System/CurrentControlSet/Services/Msahci
    - right-click Start in the Name column, and then click Modify.
    - In the Value data box, type 0, and then click OK.
    - exit the registry editor.

    This requires a reboot. so do it. enter ur BIOS Settings and enable AHCI. On boot Windows will detect the changes made and reinstall needed drivers. Requires another reboot.
  2. Did you use AS SSD to benchmark?
  3. yes thats what i used
  4. Best answer selected by Wkdsean1988.
  5. Best answer
  6. Which firmware? How full is the drive, as well as overall capacity? I have a 128GB Vertex 4 (1.4 firmware) that is ~50% full on a SATA3 connection.

    Running Crystal Disk now, will post back with the results.
    But looking at those numbers initially, they seem a bit slow, not even saturating SATA2, which I know it can do. May want to investigate why that is and optimize Windows for SSD performance.

    CrystalDiskMark 3.0.1 result for OCZ Vertex 4 128GB (v1.4) at 43% capacity.
    ..................Read..........Writes
    Seq............367.7.........343.5
    512k..........294.3.........220.2
    4k..............28.03.........59.7
    4k,Qd32....260.6..........196.2
  7. This topic has been closed by Area51reopened
Ask a new question

Read More

SSD Benchmark Vertex Storage