Up until recently I was running 4x1gb OCZ SLI-Ready Edition DDR2 800 (PC2 6400) RAM modules in a GA-P35-DS3L mobo, and have now been forced down to 2x1gb from a functionality error in one of the modules. I plan on running 2x2gb if not more, but was hoping to get some recommendations (looking to spend $80, no more than $100). I do quite a bit of multi-tasking, and this drop to 2gb is just unbearable. If I can answer any questions let me know, appreciate the help.
RAM recommendation
- Thread starter Adalor
- Start date
-
- Tags
- Power Consumption Product
This AData and this Corsair are both great choices.
http://www.newegg.com/Product/Product.aspx?Item=N82E16820211188
http://www.newegg.com/Product/Product.aspx?Item=N82E16820145184
Both run at the JDEC standard DDR2 800 1.8v cas 5-5-5-18. If the 2 x 1GB modules you have are the same voltage and speed you should have no problems running either of these kits and the 2 x 1Gb modules you already have together.
http://www.newegg.com/Product/Product.aspx?Item=N82E16820211188
http://www.newegg.com/Product/Product.aspx?Item=N82E16820145184
Both run at the JDEC standard DDR2 800 1.8v cas 5-5-5-18. If the 2 x 1GB modules you have are the same voltage and speed you should have no problems running either of these kits and the 2 x 1Gb modules you already have together.
That is factory overclocked to the lower cas. Either the AData or the Corsair should handle 2.1v and 4-4-4-15. Corsair actually used to make 4-4-4-12 2.1v DDR2 800. I used it quite a bit but no longer see it on newegg.
You could also just get 2 of the kits I linked to for 8GB of matched for around your $100 limit.
You could also just get 2 of the kits I linked to for 8GB of matched for around your $100 limit.
Mousemonkey
Titan
- Sep 3, 2006
- 59,466
- 17
- 92,965
- Status
TRENDING THREADS
-
-
Question New installed W11 on sdd, D drive (HDD) goes to the 100% in seconds
- Started by Emily_Vin
- Replies: 8
-
-
Facebook
Twitter
Instagram