MemTest86-4.0

I was running MEMTEST and it completed a couple of passes with no problems found. I came back a little later and most of the screen was filled with something that looked like "Ec". I ran it a couple of days before and the same think happened but the screen filled with a different signal. Does this mean that it found errors or is something else wrong?
3 answers Last reply
More about memtest86
  1. A few questions:

    1. How many memory modules are installed?
    2. Are they configured as per the manufacturer's specs?
    3. If more than one module, does the issue occur if you install a single module?

    Please do not insert or remove modules without disconnecting or powering off the PSU.
  2. There is 8 Gig (2GB X 4) DDR3 /@1600 MHz Dual Channel. I didn't try with single module yet.
    i7-2600K
    600W CoolMaster Silent Pro 80 Plus
    Aprevia X Dreamer 3 Case (3 Fans)
    Cool Master Hyper TX3Gaming CPU Cooling Fan
    Asus P8P67 LE B3 Revision
    ATI Radeon 5770 1GB
    No Overclocking
  3. Run http://www.memtest.org/
    test one module at a time.
Ask a new question

Read More

Memory