Gigabite ga-k8n51gnf beep codes

i get i long beep when i boot up , black screen carnt get into bios
2 answers Last reply
More about gigabite k8n51gnf beep codes
  1. If you have the AMI BIOS
    AMI BIOS Beep Codes
    *Computer gives 1 short beep when system boots successfully.
    *Except for beep code 8, these codes are always fatal.
    1 beep Refresh failure
    2 beeps Parity error
    3 beeps Base 64K memory failure
    4 beeps Timer not operational
    5 beeps Processor error
    6 beeps 8042 - gate A20 failure
    7 beeps Processor exception interrupt error
    8 beeps Display memory read/write failure
    9 beeps ROM checksum error
    10 beeps CMOS shutdown register read/write error
    11 beeps Cache memory bad
    The Award BIOS if the beep repeats it self suggest ram.
    Try reseating ram and resetting BIOS.
  2. My Gigabyte Core2 boards (P35, P45, and G41) give a series of long single beeps when I try to boot without memory.
Ask a new question

Read More

Motherboards Boot