Computer Case Stand?

[prldecivic]

Hey Guys,

Just built my computer, bought the Coolermaster HAF 922 case with the Power supply on the bottom. My case is sitting in my room with carpet and i noticed there isn't very much room underneath the psu to get air. I've been looking online for some type of stand to help raise it a little but haven't found anything. Does anyone know where i can get one?

 

[COLGeek]

How high do you want to raise the system from the floor? You could simply find/cut 2 pieces of wood (or something similar), the width of your case (or slightly wider), to place under the front and rear feet to get the additional clearance you desire. Really depends on how much top clearance you have to work with.

 

[Motopsychojdn]

It might be a case of finding something to do the job,
2 lengths of wood/metal/acrylic about a half inch high should raise it plenty,
not sure if anyone makes such a thing as a stand though
Moto

 

[tenzin]

something like this?

http://www.newegg.com/Product/Product.aspx?Item=N82E16811995041&cm_re=case_stand-_-11-995-041-_-Product

EDIT:
heres another one

http://www.newegg.com/Product/Product.aspx?Item=N82E16811995069

 

[Motopsychojdn]

Nice one Tenzin,
Moto

 

[prldecivic]

Hey, thanks for the help guys. And yeah was looking to raise it just a bit, maybe 2inches just to get some air in underneath for my Power supply.

 

[COLGeek]

Sounds like 2 each 6 to 8 inch sections of 2x4 will do the trick and cost $0.00 to me. Regardless, good luck! HOOAH!!!

 

[Alyus]

Those Syba Chassis Stands don't seem to reliable. If one of the wheels break, there goes your 50-60 lb. computer falling to its side.