Sign in with
Sign up | Sign in
Your question

Low 3Dmark score

Last response: in Graphics & Displays
Share
June 26, 2010 12:04:11 PM

my config s
amd phenom x4 9650 2.3ghz
4gd ddr2 800
POWERCOLOR RADEON 4850 512 mb
500w iball sprinter smps
................................................................I recently ran 3d mark on my pc and got a score of 11463.....But when i browsed through some articles related 2 4850 in "toms hardware" and "overclockers club",i found dat, all radeon 4850's of asus,powercolor,msi scored more than 13400+............so this means mine s 3000 marks less,and will cause drop in performance............And contrary 2 dat i'm experiencing frame dips in......burnout paradise(at 1024*768,high,4x aa) and other games.................so could u please pour out ur solutions for dis problem

I ran sm2.0,cpu test and sm3.0 .......at 1024*768...no aa

More about : low 3dmark score

a c 125 U Graphics card
June 26, 2010 12:07:28 PM

Your CPU is bottlenecking your 4850. I'd recommend overclocking your CPU.
June 26, 2010 12:24:18 PM

ya dey used a i7 975 for d test rig.........so 3dmark scores r dependent on cpu's?...........please suggest me some good softwares 2 overclock my cpu.......and can my 500w psu handle it
Related resources
June 26, 2010 12:25:21 PM

.please suggest me some good softwares 2 overclock my cpu.and can my 500w psu handle it
a c 125 U Graphics card
June 26, 2010 12:29:57 PM

I would advice you get a quality PSU like a Corsair or seasonic before overclocking

Overclocking is done in the BIOS, not via software.
June 26, 2010 12:34:42 PM

mine s not black edition.......so i have to possibly go for my fsb value.......wat value should i select....and do i have 2 make changes 2 voltage or any other values?
a c 125 U Graphics card
June 26, 2010 12:39:16 PM

If you want help overclocking then create a new thread in the "Overclocking" section of this forum.

But like I said before, I recommend you get a quality PSU before overclocking.
!