USB 3.0 starts transferring but stops and loses power Tags: Hard Drives Western Digital External USB Power USB3 Storage Last response: November 5, 2012 3:22 AM in Storage Share leiram October 30, 2012 6:05:26 AM Hello, WD External USB 3.0 HDD at USB 3.0 port of MSI 990fxa-gd80 starts transfer at around 100 Mbps but suddenly stops/loses power/not recognized by the pc so the transfer stops. More about : usb starts transferring stops loses power CocoHacker November 5, 2012 3:22:47 AM Does this happen on all the ports of the computer? Can't find your answer ? Ask ! Publish Related resources: ForumProblems transferring to/from external hard disk usb 3.0 ForumSeagate Backup Plus 3TB USB 3.0 transfer speed slow ForumWhy is USB3.0 so slow? ForumSystem Randomly Loses Power (even though connected to UPS) ForumUSB 3.0 20-1 header limitations? ForumMonitor loses video feed after a few about 30 seconds? ForumMore USB 3.0 Problems ForumAnother one of those "This device can perform faster... USB 3.0 " ForumPower Surge on USB 3.0 Port Hub ForumUSB External Hard Drive Stops Working During Transfer ForumPC Starts/Stops Continously (psu,fans) MB Light is green. ForumVhd bootable from USB ForumMy Lexar USB 3.0 Reader prevents boot past bios, why? ForumData transfer rate from SATA HDD in USB 2 docking station to USB 3 HDD ForumUSB 3.0 vs. eSATA 3.0 Forum1 HDD vs. 2 HDD RAID-0 ForumToshiba 1TB Canvio USB 3.0 not working ForumUSB Flash Drive is write protected and shows up as unknown on Disk Management. H ForumAnyone know a USB 3.0 1 TB 7200 rpm external hard drive? ForumCreate RAID Array with USB Thumb Drives in Win 8? More resources Read discussions in other Storage categories Hard Drives DVD Drives DVD Writers Optical Media Flash Media NAS/RAID SSD Western Digital !