Sign in with
Sign up | Sign in
Your question

Radeon 5770 temp sensor problem

Last response: in Graphics & Displays
Share
Anonymous
a b U Graphics card
July 2, 2010 11:47:15 AM

i bought xfx radeon hd 5770.
i put it in my computer and installed drivers .
and noticed the air that was coming out was too warm to be normal.

so ive been struggling for som hours to find out how to be able to see the temperature :pfff: 

i tried first speedfan then lavalys and then the BIOS and im still unable to see the temperature
Anonymous
a b U Graphics card
July 2, 2010 12:05:40 PM

forgot to mention some other stuff:
HD 5770 850M 1GB DDR5 DP HDMI DUAL DVI PCI-E
a c 130 U Graphics card
July 2, 2010 12:22:17 PM

Everest has the ability to do it but im not sure if you need the Ultimate edition or not. Anyway download GPUZ. When its running go to the sensors tab and you will see the temperature displayed. Or if you have not done so already go to the CCC and under overdrive it will list the temps.

Mactronix
Related resources
Anonymous
a b U Graphics card
July 2, 2010 12:35:00 PM

seems like i should not have rushed through the CCC
thanks
but is there a way to make it show on speedfan?
a c 130 U Graphics card
July 2, 2010 12:38:41 PM

Im sure there is but i havent used speed fan for about years now. If no one answers back in a day or so PM me and i will give you alink to a forum where there is a good tutorial.

Mactronix
July 2, 2010 1:14:08 PM

Quote:
seems like i should not have rushed through the CCC
thanks
but is there a way to make it show on speedfan?


run speed-fan and at the 'readings' tab check GPU for the 5770 temp
Anonymous
a b U Graphics card
July 3, 2010 11:34:20 PM

mactronix said:
Im sure there is but i havent used speed fan for about years now. If no one answers back in a day or so PM me and i will give you alink to a forum where there is a good tutorial.

Mactronix


didnt get any advice for a day or so :/ 
July 4, 2010 7:29:43 PM

If you didn't already, try this (Windows 7 and Vista only); Right click on SpeedFan and select Properties. Check the Run as an Administrator box and click Apply
!