Trying to put a gaming rig together need parts!

Hello, I just p/u an antec 900 case, antec 650w earth watts PSU and a 1TB hitachi 32mb 7200rpm sata HD for 140.00 COMbO DEAL after rebate.......... need a mobo w/usb 3.0 and at least (2 )16x pci-e slots Iam partial to ASUS ( like to stay below 200.00)6 GB DDR3 1600mhz memmory (169.00 or less)( I should have no prob finding this myself) a GTX 465 vid card , CPU will be a intel i7 920 or 930 from micro center
2 answers Last reply
More about trying gaming parts
  1. You're not getting an X58 board with USB 3/SATA III for less than $200. At least not from a good brand. Really, the only X58 board I recommend is the Gigabyte GA-X58A-UD3R, and it's about $210. The cheapest Asus one that I could recommend is the Asus P6X58D-E and it's $240. As for RAM, here's some good cheap sticks: Corsair XMS3 3x2 GB 1600 mhz CAS Latency 7.
  2. Don't get a GTX465, I would get a 460 and just overclock that, no reason for a 465 :)
    oh and fill this out PLEASE http://www.tomshardware.com/forum/261222-31-build-advice
Ask a new question

Read More

New Build Antec Systems Product