Crosshair iv formula

[Mike_99]

Hello,
I need some help setting my bios
Mother Board-crosshair iv formula
cpu-AMD Phenom II Black Edition
x 6 core 1100t
Memory-Corsair Vengeance DDR3 1866 8gb

thank you

 

[Motopsychojdn]

To what end?

your having trouble or you want to overclock?

either way your better off posting in the cpu and components or homebuild sections, more people hang out in there
Moto

 

[Mike_99]

(sorry for the delay)
yes have just put together my rig,
crosshair IV formula,
phenom II black x 6 1100t,
vengeance DDR3 1866 2x4gb,
Radeon HD 6770 1gb,
750w psu,
+ Tower.

I just wanted to set the bios correctly and maybe overclock a
little with cpu and memory in tune. when turning on turbov auto tune did not display 1866 mhz just 1066 mhz and before that 1066mhz,1333mhz so it just sent me spinning.so if you can help that would be nice, still will post it in cpu and components. (Thankyou)

 

[Motopsychojdn]

Quick answer and I'll try to find you on C&c side,
remember ddr means double data rate, i.e. to run at the correct speed you should see your ram set at about 930Mhz double it and.....
is that the only issue you thought you had?
Moto

 

[Mike_99]

(bloodyhell just had to look behind me)
yes thank you could not understand why turbov was not showing 1866mhz
and only showing between 500mhz and 650mhz sent me spinning then l thought it must be bios update bios program was saying 1304 and i did not need to up date panic again so i had a leap of faith and updated to 1902 system seem to stable had a few blue screens and a few freezes but has settled in so i just wanted to get my bios set correctly the correct enables/disables so i could rest my case any mid to high overclocking without water cooling would set me free. the user guide did not realy help in giving you a base/mid/high end setting right off the bat.Thanks again

 

[Motopsychojdn]

No problem man, glad to help if I can
Moto