Sign in with
Sign up | Sign in
Your question

Where is the memory remap feature In Gigabyte GA-EP45T-USB3P

Tags:
  • Motherboards
  • BIOS
  • Gigabyte
  • Memory
Last response: in Motherboards
Share
June 16, 2011 3:52:55 PM

Exactly where is this feather and by Name?

Gigabyte EP45T-USB3P Award Bios 6

Thanks

ba2486@chartermi.net

More about : memory remap feature gigabyte ep45t usb3p

a c 256 V Motherboard
a c 85 } Memory
June 16, 2011 6:06:33 PM

That setting most likely isn't available (it definitely isn't on the EP45-UD3P); memory remapping is enabled by default. Do you have a requirement to disable it?
m
0
l
June 17, 2011 11:17:55 AM

I am running Windows Ultimate x64 with 8gb of Mushkin DDR3 PC3 28000 1600 2x4gb Memory at 1.7 volts. Post boot shows 8gb, windows shows 8gb with 3.25gb usable. CPU Q9300 2.5 MHz running at 2.5 Video = CrossfireX - 2x ATI Visiontek 5670. msconfig boot mem max unchecked. Vertual mem set at custom 5120 men and max, Let windows decide unchecked. 7 WD HDDs no Raid. Seems remapping must be disabled. Gigabyte was no help at all, they blamed it on windows with this as a short answer.
m
0
l
Related resources
a c 256 V Motherboard
a c 85 } Memory
June 17, 2011 12:13:16 PM

On the Performance tab of Task Manager, what are the values for Physical Memory (MB) Total, Cached, Available and Free?
m
0
l
June 17, 2011 12:54:05 PM

GhislainG said:
On the Performance tab of Task Manager, what are the values for Physical Memory (MB) Total, Cached, Available and Free?



MB 3326
AV 2015
Free-64
Cached 1970

m
0
l
a c 256 V Motherboard
a c 85 } Memory
June 17, 2011 2:02:28 PM

What does Control Panel, System, "Show which operating system is running" display in the System section?
m
0
l
June 24, 2011 12:04:47 PM

Windows Experience Index 5.9
CPU 7.3
Ram 5.9
Vid 7/0
HDD 5.9


Intel 2 Quad CPU Q9300 @2.50 GHz 2.50 GHz

8 GB (3.25) usable

No Pen or Touch

ba2486
m
0
l
a c 256 V Motherboard
a c 85 } Memory
June 24, 2011 12:16:52 PM

It doesn't show what OS you're running?
m
0
l
July 1, 2011 10:52:15 AM

GhislainG said:
It doesn't show what OS you're running?


I am running Windows Ultimate x64 with 8gb of Mushkin DDR3 PC3 28000 1600 2x4gb Memory at 1.7 volts. Post boot shows 8gb, windows shows 8gb with 3.25gb usable. CPU Q9300 2.5 MHz running at 2.5 Video = CrossfireX - 2x ATI Visiontek 5670. msconfig boot mem max unchecked. Vertual mem set at custom 5120 men and max, Let windows decide unchecked. 7 WD HDDs no Raid. Seems remapping must be disabled. Gigabyte was no help at all, they blamed it on windows with this as a short answer.
m
0
l
a c 256 V Motherboard
a c 85 } Memory
July 1, 2011 1:02:50 PM

Did you try resetting the BIOS to its default settings? Could you install Windows x64 on another disk (it should be the only drive that's connected to your system) with only one video card?

Can you post the screen where you see 3.25 GB usable? I can't see that in Windows 7 or Windows Server 2008.
m
0
l
July 1, 2011 1:54:16 PM

GhislainG said:
Did you try resetting the BIOS to its default settings? Could you install Windows x64 on another disk (it should be the only drive that's connected to your system) with only one video card?

Can you post the screen where you see 3.25 GB usable? I can't see that in Windows 7 or Windows Server 2008.



Start / Computer right Click select properties get this information.

m
0
l
July 11, 2011 12:44:32 PM

Seems no one really knows Why this is happening, and yes I have tried Default settings and optimum settings. I have 6 computer with different Gigabyte boards 5 running only one video card but all running 6 and 7 WD sata HHD's and all running win x64 OS and 5 running 4 gb of memory, Non of them use all the memory.
no Raid.

So if intel chipsets and or Gigabyte boards can't use memory above 4gb so be it. I see a lot of people claiming they are able to use 8 or more gigs, but no one ever post how and with what rig setup they are achieving this.

So Show me proof and list the rig components used.

Thanx
ba2486

m
0
l
a c 256 V Motherboard
a c 85 } Memory
July 11, 2011 1:24:26 PM

Did you perform a fresh install on all systems? It's difficult to understand how you could have that issue on all systems. I'm running Windows Server 2008 x64 on a Gigabyte motherboard and all 8 GB of memory is available.
m
0
l
July 12, 2011 4:04:40 AM

GhislainG said:
Did you perform a fresh install on all systems? It's difficult to understand how you could have that issue on all systems. I'm running Windows Server 2008 x64 on a Gigabyte motherboard and all 8 GB of memory is available.



So you see you are running Server software I am running Windows, huge difference, and yes I did a fresh install to a new Hard drive to all systems.

Two of which were Retail Windows x 64 The others are RTM.
m
0
l
a c 256 V Motherboard
a c 85 } Memory
July 12, 2011 12:05:20 PM

When using 4 GB of RAM, there should be no difference. What version of Windows x64? XP, Vista or 7? Can you list all hardware on the Gigabyte EP45T-USB3P system?
m
0
l
July 14, 2011 12:32:34 PM

GhislainG said:
When using 4 GB of RAM, there should be no difference. What version of Windows x64? XP, Vista or 7? Can you list all hardware on the Gigabyte EP45T-USB3P system?



Windows Server 2008 x64 is not XP,Vista or 7, if it were it would not be called windows server.

I have no other equipment running on any of these rigs, other than a USB HHD Dock , off or on makes no difference.

Two rigs have USB Printers.
m
0
l
a c 256 V Motherboard
a c 85 } Memory
July 14, 2011 1:41:59 PM

My systems also run Windows 7 Ultimate X64 just fine and I made no changes to the configuration. All I did is install it and all RAM was available.
m
0
l
!