2 cisco router

[Guest]

Hello,
i have 2 router cisco. do i have to turn on both router ast the same time or just one first?

thanks

 

[Brian_tii]

Do you have any more details? What model routers? What are you trying to do?

 

[Guest]

Hi mate, thanks 4 ur replying.

i have 2 Cisco Router 2600 Series. i connect 2 router using back to back cable DCE/DTE and console cable connected to my pc and im using hyperterminal. i can configure first router, just say RouterA, when i finish configure RouterA, i hit Control+Z and it back to user mode again. my question is how can i go to configure second router in user mode. because in user mode already has RouterA>, how can i start with Router>. please help me and much appreciated.

Thanks

 

[Brian_tii]

It sounds like you're trying to reset the 2nd router back to factory default settings... if that's the case, the below article may help you:

https://www.cisco.com/en/US/products/sw/iosswrel/ps5187/products_tech_note09186a00802017a1.shtml

 

[Brian_tii]

If you can't get to enabled mode you'll prob want this article:

http://www.cisco.com/en/US/products/hw/routers/ps259/products_password_recovery09186a0080094675.shtml