Ati radeon x1650 pro 512 mb DDR2 Dual link DVI

Forum Graphics & Displays : AMD Radeon Ati radeon x1650 pro 512 mb DDR2 Dual link DVI

Hello, I was given an AGP graphics card and installed it into an older Pentium 3; it was going great until I forgot to remove installation CD on reboot. It now will not go past loud alarm saying a cable needs to be connected to proceed. I removed the card reinstalled old graphics card uninstalled all ATI drivers and folders. But when ATI card reinstalled the same thing happened. Is there something in the bios that was changed and/or a way to reset the card. Any help would be appreciated.

Reply to Anonymous

Have you disabled the onboard video in BIOS?

Reply to mhelm1

That card need 4pin power connector from PSU, did you plug it properly?

------------------------------ Core 2 Duo E6300 1.8 GHz (OC at 3.0 GHz) / Zigmatek HDT S1283 CPU Cooler / Gigabyte GA 965P-DS3 Motherboard / 2x1 GB DDR2 800 RAM / 2x160 GB Seagate HDDs / SilverStone ST50F 500W PSU / HIS IceQ 4 HD 4850 512 MB DDR3 / 17" LG Monitor
(Little Dinosaur)
Reply to wa1

Ask the community Add a reply

Related content

See all topics related to "Ati radeon x1650 pro 512 mb DDR2 Dual link DVI"

Tom's Hardware > Forum > Graphics & Displays > AMD Radeon > Ati radeon x1650 pro 512 mb DDR2 Dual link DVI

Go to:

Help |
Forum rules

There are 2060 identified and unidentified users. To see the list of identified users, Click here.

Bestofmedia Forum ©
2000-2009 Bestofmedia Group

Page generated in 1.512 seconds

Please mind

You are about to answer a thread that has been inactive for more than 6 months.
If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.

Add a reply Cancel