Hello World. I'm having an issue with a kingston hyperx sh103s3 120g SSD and a Gigabyte GA-78lmt-s2p Mobo. The SSD is on SATA channel 0, then the IDE storage drive on 1, finally the DVD ROM on 2. This is a fresh build with all new parts. I booted up the machine for the very first time and it posted perfectly (no os) then I used the retail windows 8 install disc, booted again and installed. The windows install was fine, everything looked great. I finished it up, powered down and came back to the machine later, powered up and the SSD is not visible, no system os. I powered down and back up and it appears and the computer boots fine. I am a DJ and this is our bar machine, but each night I have to power it up, power down then up again in order to get into windows. Thats the only issue, the computer runs beautifully. I have done some research and discovered AHCI, registry fixes etc. I can't afford to muck up the machine with "well try this" fixes and patches, so I'm wondering what the best path to take is to resolve this. I did try to set the sata 0 to AHCI.. but getting through the system post took 5 minutes and it finally hung. Cheers in advance for your time.