My p4 cannot detect my sata hd in the bios setting,what to do best? tnx Tags: Hard Drives SATA HD BIOS Storage Last response: November 30, 2012 9:48 PM in Storage Share Jenero Galerian November 30, 2012 12:43:32 AM I connected right & properly both the data & supply connector of my sata hd thru my p4 mainboard. Yet,when I go to bios set-up, the sata hd w-is not detecting.What should I do? thanks. More about : detect sata bios setting tnx phil22 a c 79 G Storage November 30, 2012 9:48:13 PM Try a new sata cable. Check that the power connector to the drive actually has voltage getting to it, or try a different power connector & cable if there is one spare. m 0 l Can't find your answer ? Ask ! Publish Related resources SolvedNew Build, BIOS does not detect HD (but problem intermittent), problem not solved by swapping SATA & power cables Forum BIOS cannot detect SATA anymore Forum Asus bios cannot detect sata wd hard disk Forum Bios cannot detect marvell sata 6gb Forum Bios did not detect new SATA HD Forum SolvedSATA-300 HD not detected by BIOS... Help guys! Forum SATA HD stopped working, BIOS not detected Forum SATA HD not detected in BIOS Forum SATA HD not detected in BIOS Forum SATA HD not detecting in BIOS Forum More resources Read discussions in other Storage categories Hard Drives DVD Drives DVD Writers Optical Media Flash Media NAS/RAID SSD Western Digital !