Jmicron member drives have lost member status
I have a raid 10 set up with 4 2TB disks using jmicron on the MOBO. this morning it showed one of the disks as non member, but then on the next boot it added another drive in the machine as a member disk. this was my backup disk. Now the 4 original disks are marked as non member disks, and the backup drive is marked member disk. what do I do to get these disks marked back to the way that they should be and not lose my data. This data is extremely important. thank you for your help.
Kelly
Kelly
More about : jmicron member drives lost member status
Related ressources:
- ForumIch7r raid 5 one offline member
- ForumOffline Member Disks Raid Undefined
- ForumNew Member Listing?
- ForumTom's Hardware Member System Gallery
- ForumRAID 5 non- member drives - how to add back or recover?
- ForumLots of money on PSU = Lost of wasted cash!
- ForumICH9R; RAID 5; cannot re-add drive to volume
- Forumupgrade NT BDC to 2K member server
- ForumHow can I read files on LaCie Drive using Linux
- ForumRAID-5 vs non- member disc (safe recovery needed)
- ForumWhen did OCZ stop using the Jmicron controller?
- ForumLooking to secure raid 0 config, please help! Also on MBR and GPT!
- ForumMy computer is saying that there is a hard disk failure
- ForumSSD Drives wand windows
- ForumToshiba external hard disk is detected but shows empty and asks to format i have
- ForumIs it possible to swap hard drives on two exact models
- Forum[Solved] Hard disk drives missing in windows 7
- Forum[Solved] Cloning 2 hard drives on to one large one.
- ForumI have got a Dell Inspiron laptop N4030, EXPRESS service code number 63ZD8N1. I
- Forum[Solved] Clean install vs. Clone/relation with content on other drives.
- More resources
Read discussions in other Storage categories
!
