HELP !!!

[55Range]

Hey ppl, am in a really strange situation,
My pc was working awesome, got a Q 8400 oc to 3.6, Zotac gtx 460, 4 gb ram ddr2, p45 msi board..
The problem arised when i tried to add another 2 gb ram to my setup[got windows 7 ultimate x64], system didnt start up, well obviously at the end, i just removed it, but the problem remained, system just blocked each time on the win 7 loading screen [ the black screen with logo], if i tried to restart then it might just boot well, and everyone down i completely shut down the pc,then at startup, it just hangs again on loading screen. Thats everytime i swith it on. Then it say windows recovered from a serious problem- bluescreen ..124
When system booted well, i checked all the specs, and did some benchmark, results were as before, so all my components are working well, i suppose.
I tried to install win 7 on another disk[500 gb disk bought few days ago], same exact problem !!!

What do you suggest i do ?

NB- GTX 460 , 2 gb ram and hardrive is new, few days old, well they worked well and still do, if wind loads up .

 

[Wamphryi]

Dude,

I am reasonably confident that you need to change the brand of ram you are using and make the specifications of the new RAM match exactly with your original RAM. Win 7 is very fussy with its RAM. It may even be that it will work with two but not four Gig of that brand. I have the problem before on a laptop.

 

[aford10]

It sounds like you have some RAM kits that don't have the same timings and voltages. Different RAM kits don't always play nicely together.

 

[jsc]

Try running the memory at 2.2 volts and loosen the memory timing of the quicker sticks to match the slower.

 

[55Range]

There is some new things:
When i switch it on, win hangs on start screen, then i restart it, everything goes fine !
Each time i switch on , i have to restart again for it to work, when its on i get windows recovered form serious error[see below] but when it works everything works fine,

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: 124
BCP1: 0000000000000000
BCP2: FFFFFA8004F9F038
BCP3: 0000000000000000
BCP4: 0000000000000000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\082810-19203-01.dmp
C:\Users\Elvin B\AppData\Local\Temp\WER-29281-0.sysdata.xml

Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

 

[55Range]

The strange thing is when restarting all is fine..
So everytime i switch on pc, need to restart for it to work.

 

[4745454b]

Reset the bios?

 

[55Range]

Yep , that is did..Stil same thing, will try to update the bios ?

 

[4745454b]

I'd try manually setting the memory timings and voltage before updating.

 

[55Range]

Well , updated the bios, and now everything is good again //!
Was a scary one .

 

[55Range]

Best answer selected by 55range.