Cable connectons to motherboard

[wtwoody]

Hello,
I removed all the plugs on the board and cannot remember how they go back. problem is it won't power up, i replaced the motherboard and cpu, heatsink was so dirty you could not see the fins

 

[o1die]

Try to locate the cluster with the power switch; with the power supply on, try touching around the cluster with a regular screwdriver until it powers up; should be able to narrow it down by this method. Won't hurt anything to connect the wrong case connectors to this cluster; all are low voltage, just don't use the usb connectors.

 

[Motopsychojdn]

Identify your mobo then look for a manual from the manufacturers webby, pin guide will be in there
Moto